squishyball(1)

NAME
squishyball - perform sample comparison testing on the command line

SYNOPSIS
squishyball [options] fileA [fileB [fileN...]] [> results.txt]

DESCRIPTION
squishyball is a simple command-line utility for performing double-blind A/B, A/B/X or X/X/Y testing on the command line. The user specifies two input files to be compared and uses the keyboard during playback to flip between the randomized samples to perform on-the-fly comparisons. After a predetermined number of trials, squishyball prints the trial results to stdout and exits. Results (stdout) may be redirected to a file without affecting interactive use of the terminal.

squishyball can also be used to perform casual, non-randomized comparisons of groups of up to ten samples; this is the default mode of operation.

TEST TYPES

-a --ab
    Perform A/B test on two input samples.

    A/B testing randomizes the order of two input samples and presents them, unnamed, as sample 'A' and sample 'B'. In each trial the user selects A or B as the preferred sample. The samples are then re-randomized for the next trial. This test is useful for establishing relative or preferred quality between two samples.

-b --abx
    Perform A/B/X test on two input samples.

    A/B/X presents two input samples, unrandomized, as sample 'A' and sample 'B'. A third sample 'X' is chosen randomly from either 'A' or 'B'. In each trial, the user selects A or B as the sample believed to be the same as X. X is then re-randomized for the next trial. This test is useful for determining if any differences are audible between two samples and to what confidence level.

    Note that because the A and B samples are not randomized (they are presented in the order given on the command line as per standard industry practice), an A/B/X test does not eliminate ordering bias. A stronger version of this test that randomizes all samples is the X/X/Y test below.

-c --casual
    Perform casual comparison of up to ten samples (default).

    Casual comparison mode does not randomize the input samples or perform multiple trials. It simply provides a convenient way to rapidly flip back and forth within a group of up to ten samples.

-x --xxy
    Perform randomized X/X/Y test on two input samples.

    X/X/Y testing is a form of A/B/X testing in which the order of all samples is randomized and the position of the 'X' sample is not known ahead of time to be in the third position. In each trial, the user selects which of sample 1, 2 or 3 is believed to be the sample that is different from the other two. This test is useful for determining if any differences are audible between two samples and to what confidence level. It is a stronger version of the A/B/X test that eliminates sample order bias.

OTHER OPTIONS

-B --beep-flip
    Mark transitions between samples with a short beep.

-d --device N|device
    If a number, output to Nth available sound device. If a device name, use output device matching that device name. The backend audio driver is selected automatically based on the device name provided.

-D --force-dither
    Always use dither when down-converting to 16-bit samples for playback on audio devices that do not support 24-bit playback. By default, uncompressed samples are always dithered, but lossy formats (such as Vorbis and Opus) are simply rounded. See the section CONVERSION AND DITHER below for more details.

-e --end-time [[hh:]mm:]ss[.ff]
    Set sample end time for playback.

-g --gabbagabbahey | --score-display
    Show running score and probability figures of trials so far while testing. Can only be used with -a, -b, or -x.

-h --help
    Print usage summary to stdout and exit.

-M --mark-flip
    Mark transitions between samples with a short period of silence (default).

-n --trials n
    Set desired number of comparison trials (default: 20).

-N --do-not-normalize
    Do not perform autonormalization to avoid clipping when sample values exceed the maximum playback range in floating point, lossy, and downmixed samples.

-r --restart-after
    Set 'restart-after mode', where sample playback restarts from start point after every trial.

-R --restart-every
    Set 'restart-every mode', where sample playback restarts from start point after 'flip' as well as after every trial.

-s --start-time [[hh:]mm:]ss[.ff]
    Set start time within sample for playback

-S --seamless-flip
    Do not mark transitions between samples; flip with a seamless crossfade.

-t --force-truncate
    Always round/truncate (never dither) when down-converting samples to 16-bit for playback on audio devices that do not support 24-bit output. See the section CONVERSION AND DITHER below for more details.

-v --verbose
    Produce more and more detailed progress information and warnings.

-V --version
    Print version and exit.

-1 --downmix-to-mono
    Downmix all multichannel samples to mono at load time.

-2 --downmix-to-stereo
    Downmix all surround samples to stereo at load time.

KEYBOARD INTERACTION

a, b, x
    Switch between A and B samples (A/B mode), or A, B and X samples (A/B/X mode).

A, B
    Select A or B as preferred sample (A/B mode), or sample A or sample B as match to sample X (A/B/X testing mode).

1, 2, 3...
    Switch between first, second, third [etc] samples (X/X/Y testing mode, casual comparison mode).

!, @, #
    Indicate the 'odd sample out' as sample 1, 2, or 3 (X/X/Y testing mode).

<del>, <ins>
    Undo/redo previous trial result selection.

<enter>
    Choose current sample for this trial.

<-, ->
    Seek back/forward two seconds, +shift for ten seconds.

<up/down>
    Select sample in sample list (casual mode).

<space>
    Pause/resume playback.

<backspace>
    Reset playback to start point.

e   Set end playback point to current playback time (see also -e above).

E   Reset end playback time to end of sample.

f   Toggle through beep-flip/mark-flip/seamless-flip modes (see -B, -M, and -S above).

r   Toggle through restart-after/restart-every/no-restart modes (see -r and -R above).

s   Set start playback point to current playback time (see also -s above).

S   Reset start playback time to beginning of sample.

?   Print this keymap. The keymap will not be printed if the terminal has insufficient rows to do so.

^c  Abort testing early.

SUPPORTED FILE TYPES

WAV/WAVEX
    8-, 16-, 24-bit linear integer PCM (format 1), 32-bit float (format 3)

AIFF/AIFF-C
    8-, 16-, 24-bit linear integer PCM, 32-bit floating point

FLAC/OggFLAC
    16- and 24-bit

SW  Mono signed 16-bit little endian 48000Hz raw with a .sw extension

OggVorbis
    all Vorbis I files

OggOpus
    all Opus files

CONVERSION
squishyball 'reconciles' files to identical channel ordering, length and bit-depth before playback begins so that CPU and memory resource usage during playback should be identical for all samples. When 24-bit playback is available and at least one sample is 24-bit or greater (ie, 32-bit or float), all samples are converted/promoted to 24 bits. If 24-bit playback is unavailable, all samples are demoted to 16 bits. Note that Opus and Vorbis files are both considered to be natively float formats.

NORMALIZATION

squishyball checks files for clipping at load time. By default, squishyball will automatically normalize all float inputs by the amount needed to avoid clipping any one. Automatic normalization can be disabled with the -N option. Integer samples are checked for clipping heuristically; two or more consecutive full-range values in a channel count as clipped. Out-of-range integer values cannot be recovered; in this case, squishyball issues a warning and performs no normalization based on the integer clipping.

Downmixing samples to mono with -1 or stereo with -2 will also likely require normalization to avoid clipping; as above, squishyball will automatically normalize all inputs by the amount necessary to avoid clipping in any one unless -N is specified.

DITHER
Down-conversions of uncompressed and lossless samples (WAV, AIF[C], FLAC, SW) to 16-bit are dithered using a simple white TPDF. Lossy-encoded samples (Vorbis and Opus) are dithered to 16-bit only if one or more uncompressed/lossless inputs are also being dithered. Normalization also triggers dithering of all input samples (uncompressed, lossless and lossy) upon conversion to 16 bit.

-D overrides the default behavior and forces unconditional dithering of all 16-bit down-conversions. Similarly, -t forces unconditional rounded truncation in all cases, disabling dither completely.

Conversions to 24-bit are never dithered.

IMPORTANT USAGE NOTES

Playback Depth and Rate

    Many modern audio playback systems (such as PulseAudio or the ALSA 'default' device) give no means of determining if the requested playback paramters are actually being used by the hardware, or if the audio system is helpfully converting everything to some other supported depth/rate. When using these systems, squishyball has no way of knowing if 16-/24-bit playback or sample rate is being honored. Automatic conversion can affect audible playback quality; be careful to verify actual system behavior.

Flip-Mode Choice

    Silent Mode smoothly transitions between samples. It allows the most direct comparison between signals without any intervening auditory distraction. However, the temporary combination of different signals may cause unintended cancellation and comb-filtering effects that can give away the 'unknown' sample just as a 'pop' from an instantaneous transition would.

    Mark Mode quickly fades to silence before flipping to another sample, marking the transition. Because the samples never overlap, crosslap artifacts cannot contaminate trial results. However, the audible dip between samples may distract from listening, potentially making it slightly more difficult to detect legitimate artifacts.

    Beep Mode is similar to mark mode but adds a soft 'beep' to mark where the transition occurs. It makes the transition point especially obvious. It does not crosslap the samples; one sample is faded completely before the second is mixed in as in mark mode.

AUTHORS
Monty <monty@xiph.org>

SEE ALSO

abx-comparator(1), rateit(1), ogg123(1), oggdec(1), opusdec(1), flac(1)